SATO SG112 ex Programming Reference Manual page 466

Hide thumbs Also See for SG112 ex:

Table of Contents

Timing Chart

1) Normal process

Initializing

Printer Status

2) Cancel process

Printer Status

STX . . ETX (1)

Receive/Analysis/Edit (1)

Printing (1)

Note: Avoid sending ENQ while sending the print data (STX <A> - <Z> ETX).

This may cause return status error or print error.

STX . . ETX (1)

Receive/Analysis/Edit (1)

Printing (1)

Note: When the cancel request command has sent, wait more than 500 ms before sending the next data.

Avoid sending CAN while sending the print data (STX <A> - <Z> ETX). This may cause cancel error or print error.

With the above condition, the job may not be canceled or the item may not be printed correctly.

Receive buffer near full state

Receive buffer near full release

STX . . ETX (2)

Receive/Analysis/Edit (2)

Press the LINE key

STX . . ETX (3)

Receive/Analysis/Edit (3)

Printing (2)

STX . . ETX (2)

Receive/Analysis/Edit (2)

Printing (2)

Press the LINE key