Table of Contents
Advertisement
[ESC+GI] Registration of Graphic
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the registration of graphic pattern data.
[Format]
<GI>abbbcccdddn...n
-
Parameter
a [Selection of data transfer in HEX or BIN]
H : Hex data
B : Binary data
Hex data (Divide 8 bits data into 4 bits and outputs it as hex code corresponding to ASCII)
Binary data (Output 8 bits data as one character data all at once)
b [Specification of crosswise graphic area per byte] = Refer to [Specified Range] section below.
c [Specification of lengthwise graphic area per byte] = Refer to [Specified Range] section below.
d [Registration number] (Identification number when invoking) = Valid range : 1 to 999
n [Data] = Graphic data
[Coding Example 1]
[H: HEX data] is specified for [Data specification by HEX and BIN]
[□] is registered to the 999th of the slot 1 by the below.
<A>
<CC>1
<GI>H001001999<46463831383138313831383138314646>
<Z>
[Coding Example 2]
[B: Binary data] is specified for [Data specification by HEX and BIN]
[□] is registered to the 999th of the slot 1 by the below.
<A>
<CC>1
<GI>B001001999<FF818181818181FF>
<Z>
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
16
GI
<47>
<49>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
16
347
Parameter
abbbcccdddn...n
Advertisement
Table of Contents
