Table of Contents
Advertisement
[Supplementary Explanation]
-
The stored data is cleared when this product is powered off.
-
The item name will not be changed when [Data item name] parameter is omitted.
-
Only for the available digit of the data from the start will be stored when the specified number
of data exceeded the input digit. Note that the data exceeded the available digit are not
maintained.
e.g.) <IF>1,5,12345678 -> only 5 digit data "12345" is stored.
-
When the data are less than the input digit, following parameter or command sequence become
the buffer input data and it will not operate normally.
e.g.) <IF>1,5,456,DATA1 -> 5 digit data "456,D" is stored. Nothing will be stored for the item
name.
-
When specified already stored internal buffer number, the stored data is overwritten and stored
in the buffer.
377
Advertisement
Table of Contents
