Table of Contents
Advertisement
[ESC+PG] Designation of Registration on Printer Motion
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Registering the operation of the printer.
[Format]
<PG>abcdefghhijklmnooppqqrrstuvwxy
-
Parameter
For the detailed parameter, refer to the table in the "Parameter" section.
[Coding Example]
<A>
<PG><00 00 04 00 00 00 00 41 01 00 00 03 00 00 01 0C 80 03 40 00 00 00 00 00 00 00 00 00 00 00 ＞
<Z>
Parameter is described in HEX; <00>
[Supplementary Explanation]
-
This command is not necessary in the normal label printing operation.
-
Operation settings specified with this command are still in effect after turning off this product.
-
Do not send this command during the print operation. The sensor of this product may not be
disabled if this command is sent during the print operation.
-
When there is illegal parameter, the command error occurs and the setting is not saved.
[Points]
-
The registration of the printer motion can be done in the settings mode and advanced mode in
this product without using this command.
ESC
PG
<1B>
<50>
16
Refer to the table below.
When the power is OFF
Valid range within items
Valid range between items
Parameter
<47>
abcdefghhijklmnooppqqrrstuvwxy
16
16
The set parameter is maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
<00>
<04>
. . . . .<00>
16
16
16
318
16
16
Advertisement
Table of Contents
