Table of Contents
Advertisement
<Q>1
<Z>
[Supplementary Explanation]
-
Specification of [B] has shorter program description than that of specification [H]; and, transfer
data length is 50 percent shorter. This could be advantage in data capacity.
-
Specification of Rotation <%> and Enlargement <L> are available.
-
Enlargement <L> should be placed just before Graphic Print <G>.
-
When using Rotation <%> and Enlargement <L> commands at the same time, specify <%>
command before <L>.
-
The crosswise maximum byte and lengthwise maximum byte are specified in [Initial value of
parameter and Valid Range] section below, however, it is possible to specify up to 999 bytes to
have compatibility with the old model.
It is possible to print less than 2937600 bytes as the graphic data.
-
The calculation of graphic data size is [crosswise maximum byte x lengthwise maximum byte x
8].
[Initial value for parameter and Valid range]
Crosswise max. bytes: 400
Lengthwise max. bytes: 450
298
Advertisement
Table of Contents
