Table of Contents
Advertisement
Modification Commands
[ESC+P] Character Pitch
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying character pitch by dot.
[Format]
<P>aa
-
Parameter
a [Character pitch] = Valid range: 00 to 99 dots
[Coding Example]
Character pitch: 10
<A>
<V>200<H>100<P>10<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
-
Character pitch means the character gap or font gap when selecting font or barcode.
-
Specified character pitch will be widened based on the ratio of Enlargement <L>.
-
The Character Pitch <P> maintains the parameter only in the field. Even if linefeed code [CR] is
specified in Auto Linefeed <E>, the character pitch remains the same without returning to initial
value. Start of Data Transmission <A> can be used to reset to the initial value.
-
By specifying Character Pitch <P> just before the barcode specification, pitch command
becomes valid for barcode module.
Object barcode: NW-7, CODE39, Industrial 2of5, Matrix 2of5
For more information, refer to "(3) Intercharacter gap" in "Barcode Command."
-
Data specification except numeric value or specification of over-digit will give the initial value.
ESC
<1B>
16
aa=02
When the power is OFF
Valid range within items
Valid range between items;
P
<50>
16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
28
Parameter
aa
Advertisement
Table of Contents
