[ESC+2D32] Micro QR Code
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying QR Code (Micro QR Code).
[Format] (Setup part)
<2D32>,a,bb,c
-
Parameter
a [Error Correction Level]
L : 7%
M : 15%
Q : 25%
b [Size of one side of cell] = Valid Range : 01 to 32 dots
* Specify more than 02 dots, otherwise scanner may have reading problem.
c [Data setup mode]
0 : Manual setup
1 : Automatic setup
[Format] (Data part)
Manual setup (Data setup mode)
<DS>k,n...n : Use when input mode specification is Numeric mode, Alphanumeric mode and Kanji
mode.
<DN>mmmm,n...n : Use when specifying by binary.
Automatic setup (Data setup mode)
<DN>mmmm,n...n : Change input mode automatically according to input data.
-
Parameter
k [Input mode]
1 : Numeric mode
2 : Alphanumeric mode
3 : Kanji mode (Shift JIS Kanji)
* There is binary specification other than above, but data specification command is different.
m [Number of data] = Valid Range : 1 to 15
* Specify when specifying Automatic setup in Data setting mode.
n [Print data] = Data
[Supplementary Explanation1]
-
When specifying Kanji in <DN>, specify size that is 2 x number of Kanji characters.
ESC
2D32
<1B>
<32>
<44>
16
16
None
When the power is OFF
Valid range within items
Valid range between items
<33>
<32>
16
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
230
Parameter
,a,bb,c