Table of Contents
Advertisement
[ESC+F] Sequential Number
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying prior to the data specification command of font or barcode, and printing specified data in
a sequential order.
[Format]
<F>aaaabcccc(,dd,ee,f)
-
Parameter
a [Print quantity specification of identical contents] = Valid range : 1 to 9999
b [Increasing and decreasing specification]
+ : Addition
- : Subtraction
c [Setting of increasing and decreasing value] = Valid range : 1 to 9999
d [Valid digit number for sequential number] = Valid range : 1 to 99 When omitted: 8 (omissible)
e [Low-order invalid digit number] = Valid range : 0 to 99 When omitted: 0 (omissible)
Starting with the rightmost position
f [Specification of Decimal/Hex sequential number]
0 : Decimal number When omitted: 0 (omissible)
1 : Hexadecimal
[Coding Example]
Print quantity specification of identical contents: 1, Increasing and decreasing specification: +,
Setting of increasing and decreasing value: 1, Valid digit number for sequential number: 5, Loworder
invalid digit number: 0
<A>
<V>100<H>100<P>2<L>0202
<F>1+1,5,0<XU>10000
<Q>2
<Z>
[Supplementary Explanation]
-
Sequential number can be specified up to 8 points per format.
-
Next print data from <F> command will be the initial value of sequential number.
-
Specify the required number of digits for sequential number to print it properly. If not specified,
sequential numbers may not be printed properly.
-
Specification of Black/White Reverse Print <(> is not valid for sequential numbered data.
-
Auto Linefeed <E> is not available.
-
Need to print font or barcode to print sequential number.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
F
<46>
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
35
Parameter
aaaabcccc(,dd,ee,f)
Advertisement
Table of Contents
