Table of Contents
Advertisement
[ESC+WD] Partial Copy
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Copying specified area to another place.
[Format]
<WD>VaaaaaHbbbbYcccccXdddd
-
Parameter
a [Vertical start point of original data] = Valid range: Refer to [Valid Range] section below.
b [Horizontal start point of original data] = Valid range: Refer to [Valid Range] section below.
c [Vertical dot size of original data] = Valid range: Refer to [Valid Range] section below.
d [Horizontal dot size of original data] = Valid range: Refer to [Valid Range] section below.
[Coding Example]
Vertical start point of original data: 50, Horizontal start point of original data: 50,
Vertical dot size of original data: 200, Horizontal dot size of original data: 400
<A>
<V>50<H>50<P>2<L>0202<XU>ABCD
<V>300<H>100<WD>V50H50Y200X400
<Q>2
<Z>
dddd
aaaaa
bbbb
Ａ Ａ Ｂ Ｂ Ｃ Ｃ Ｄ Ｄ
ccccc
Dotted line part indicates the copied area.
Actual print portion is "ABCD."
[Supplementary Explanation]
-
To locate the destination of copy, specify Vertical Print Position <V> and Horizontal Print
Position <H> prior to this command.
-
Destination of copy has to be outside of specified original data.
-
When the print start position of the copied area is outside of printing area, printing will not be
performed due to command error.
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
Ａ Ａ Ｂ Ｂ Ｃ Ｃ Ｄ Ｄ
WD
<57>
<44>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
51
Parameter
VaaaaaHbbbbYcccccXdddd
Advertisement
Table of Contents
