SATO SG112 ex Programming Reference Manual page 199

Hide thumbs Also See for SG112 ex:

Table of Contents

[Supplementary Explanation]

This command supports UPC-A only. When barcode type is specified other than "H," command

error occurs.

Setting of Guard bar, HRI and ratio is described as follows.

Guard bar: Available

When the parameter value exceeds the range, operation is not supported.

When printing UPC-A with <D>, all character barcodes have the same height. When <BL>

is used, the height of the character barcode of the start digit and the last digit have the same

height of the guard bar.

Character barcode

UPC-A specifying <D>

Character barcode

UPC-A specifying <BL>

Character barcode

Character barcode