SATO SG112 ex Programming Reference Manual page 151

Hide thumbs Also See for SG112 ex:

Table of Contents

[Supplementary Explanation]

Registering 24 x 24 dots external fonts in the internal memory or user registration memory.

The code to specify in the registration font code address needs to match the Kanji Set <KS>

and Kanji Code <KC>.

Overwriting registration data is available.

The order of data registration is as follows.

The data registered in the memory of this product will be deleted at the power off. In this case,

you need to register the data again.

External character file [24 × 24]

When registering the external characters described above, D1 data becomes <00>

data becomes <3C>

consists of [00111100] and D3 consists of [00000000].

In the same manner, D4 is <00>

data will be <003C00003C00.....>

The data registered in the user registration memory will be maintained after the power is off.

You cannot use the internal memory in combination with the user registration memory.

Specify the slot to register.

If <CC> command is not sent after the power on, the data is registered in the internal memory.

and D3 data becomes <00>

because D1 consists of [00000000], D2

, D5 is <3C>

, D6 is <00>

, and the external registration