Status5 return
The purpose of this communication protocol is to monitor and to control the status of printer data on
host, and this communication protocol has variety of functionalities.
Receive mode for this communication protocol is multi buffer mode.
Connection diagram
1) DB-9P
This product
RD
2
SD
3
SG
5
IMPORTANT: Depending on the host used, it may need to loop CS and RS (constantly maintain at "High" level) on the host
side. For more details, refer to your host computer documentation.
I/O signal
Pin no.
2
RD
3
SD
5
SG
Host
3
2
5
Signal
I/O
name
Input
Output
-
SD
RD
SG
Data transferred from the host to this product
Data transferred from this product to the host
Signal ground
460
Contents