System Commands
[ESC+CS] Print Speed
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the speed of printing.
[Format]
<CS>aa
-
Parameter
a [Print speed] = Refer to [Initial value for parameter and Valid range] section below.
[Coding Example]
<A>
<CS>4
<Z>
[Supplementary Explanation]
-
Print speed value specified by the command or "Settings" mode is maintained.
[Points]
-
If the value over valid range is specified, command error will occur and print speed will not be
changed.
-
Use default set operation of printer to set back the value to the initial one.
ESC
<1B>
16
Refer to [Parameter Initial Value and Specified Range] section below.
When the power is OFF
Valid range within items
Valid range between items
CS
<43>
<53>
16
16
The set parameter is maintained.
The set parameter is valid until the next specification is
made.
The set parameter is valid until the next specification is
made.
301
Parameter
aa