Table of Contents
Advertisement
Notes for LAN Interface
-
Please refer to the Operator Manual for LAN interface setting.
-
150 ms to 200 ms interval is required to close port then open port, if you want to open and
close print data port (Port1024), status port (Port1025) and send/received port (Port9100).
Short interval setting may cause double connection. Request for double connection occurs
when [CONNECT] request is made to Port (Port1024, Port1025 or Port9100) in addition to
the request [CONNECT (Socket OPEN)] which has already been made to Port (Port1024,
Port1025 or Port9100). When printer receives request for double connection, it sends response
of disconnection (Socket CLOSE) to the request.
-
Communication may not be established if you plug in/out LAN cable while PC is connected. Do
not plug in/out LAN cable while starting up printer. When LAN cable is removed/inserted and it
caused communication loss, please turn off and turn on the power of this product.
506
Advertisement
Table of Contents
