SATO SG112 ex Programming Reference Manual page 70

Hide thumbs Also See for SG112 ex:

Table of Contents

[Supplementary Explanation]

If Label Size <RI> data does not match Media Size <A1>, an error occurs.

Label Size <RI> automatically calculates the label width and label length to print.

Label Size <RI> and Telegraphic Message End <RE> should be paired.

Each Label Size <RI> command should be followed by Telegraphic Message End <RE>, if

<RE> is not sent after <RI>, the second and subsequent <RI> commands will be invalid (No

error sound).

This Standard command cannot be used in combination with other commands.

When you program, use Small Label Size <PD>.