Table of Contents
Advertisement
Print End Request Command
This command halts the printing process.
The status of this product after receiving command is returned.
1. Command DLE (HEX 10H)
2. Return status list
Return status
ACK (HEX 06H)
NAK (HEX 15H)
Please do not send DLE (Print stop request command) while STX <A> to <Z> ETX. DLE (Print
stop request command) would not be sent properly. Font data, graphic data, barcode data will
not be processed as DLE transmission (Print stop request).
Print Start Request Command
This command releases the pause mode of this product and restarts the printing process.
The status of this product after receiving command is returned.
1. Command DC1 (HEX 11H)
2. Return status list
Return status
ACK (HEX 06H)
NAK (HEX 15H)
No error in this product
Error in this product
No error in this product
Error in this product
417
Contents
Contents
Advertisement
Table of Contents
