SATO SG112 ex Programming Reference Manual page 360

Hide thumbs Also See for SG112 ex:

Table of Contents

[Supplementary Explanation]

Overwriting registration data is available.

Specify slot registered with Card Slot for Use <CC> prior to this command <T1> by all means.

When use <T1> with another registration command, it may occur error because of capacity

shortage of the memory card.

In this case, register another command in another memory card, or use a memory card having

bigger capacity.

Data output is as follows.

External file [16x16]

When registering the external characters described above, D1 data becomes <01>

data becomes <80>

In the same manner, D3 is <03>

registration data will be <018003003FFC.....>

The error occurs when unused slot is specified.

Do not power off this product when accessing to the memory. When this product is turned off

while memory accessing, the data in the accessed media may be corrupted.

because D1 consists of [00000001], D2 consists of [10000000].

, D4 is <00>

, D5 is <3F>

, D6 is <FC>

, and the external