Mounting; Mounting The To-Pass ® Telecontrol Module To The Din Rail; Figure 12: Mounting The To-Pass ® Telecontrol Module To The Din Rail - WAGO -TO-PASS 761 Manual

34

Mounting

Pos : 19 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Monti eren - D emontieren/M ontier en - Übersc hrift 1 @ 3\mod_1225446744750_21.doc x @ 24900 @ 1 @ 1
4 Mounting
Pos : 20 /Serie 761 (TO- PASS)/M ontier en/Montage 761- 1xx/- 2xx/- 3xx @ 3\mod_1222232202218_21.doc x @ 22108 @ 22 @ 1
IP20 degree of protection
The protection class of the TO-PASS
WAGO Kontakttechnik GmbH & Co. KG recommends mounting in a housing or
in a switching cabinet.
Ambient temperature -20 °C to +70 °C
The TO-PASS
°C to +70 °C.
In the event of higher or lower temperatures, proper cooling or heating
arrangements must be provided.
Please contact WAGO Kontakttechnik GmbH & Co. K.G. for assistance.
The TO-PASS
4.1 Mounting the TO-PASS
DIN rail
Figure 12: Mounting the TO-PASS
1. Place the TO-PASS
2. Press the undersurface against the lower DIN rail edge until the TO-PASS
telecontrol module locks into place.
®
telecontrol module is designed for an ambient temperature of -20
®
telecontrol module is designed to mount on a DIN 35 carrier rail.
®
telecontrol module to the DIN rail
®
telecontrol module on the DIN rail from above.
761-314 TO-PASS® Mobile, 4 AI
®
telecontrol module is IP 20. For this reason,
®
telecontrol module to the
WAGO-TO-PASS® 761
®
Manual
Version 2.0.0