Table of Contents
Advertisement
10 •
751-3502 [AS-Interface Module 4IN 24V A/B]
Display Elements
Warning
The inputs are DC coupled with the AS-Interface voltage. They shall not be
supplied with an external supply voltage!
Warning
Connectors must only be mated or unmated in "No Load" condition!
2.1.1.3.3 Programming Connector
On the left side of the front plate is the programming connector. It is a plug for
a DC socket which is compatible with all popular programming adapters, for
example Pepperl+ Fuchs VAZ-PK-1.5M-V1-G.
Please note manufacturer documentation for the operation of the programming
device.
2.1.1.4 Display Elements
Tab. 2.1.1-3: Display Elements
FLT ASI
Fig. 2.1.1-4: Display
Elements
2.1.1.5 Operating Elements
The AS-Interface module 751-3502 has no operating elements.
LED
I1
yellow
I2
yellow
I4
I3
I2
I1
I3
yellow
I4
yellow
FLT
gq35012x
red
ASI
green
Designation
Status
off
Status
DI1
on
off
Status
DI2
on
off
Status
DI3
on
off
Status
DI4
on
off
on
Error
blinking
off
AS-Interface
supply
on
AS-Interface Components IP20
Function
Input 1, Signal voltage (0)
Input 1, Signal voltage (1)
Input 2, Signal voltage (0)
Input 2, Signal voltage (1)
Input 3, Signal voltage (0)
Input 3, Signal voltage (1)
Input 4, Signal voltage (0)
Input 4, Signal voltage (1)
OK
Configuration error
Short circuit / sensor supply
overload
AS-Interface supply error
AS-Interface supply OK
WAGO-I/O-SYSTEM 751
Advertisement
Table of Contents
