Display Elements; Operating Elements; Fig. 2.1.1-5: Display Elements; Tab. 2.1.1-3: Display Elements - WAGO 751-5702 Manual

2.1.1.4 Display Elements

Tab. 2.1.1-3: Display Elements

FLT ASI
Fig. 2.1.1-5: Display
Elements

2.1.1.5 Operating Elements

The AS-Interface module 751-5702 has no operating elements.
WAGO-I/O-SYSTEM 751
AS-Interface Components IP20
LED
yellow
yellow
yellow
yellow
O1
I4 I3 I2 I1
yellow
O2
yellow
AUX O3 O2 O1
O3
yellow
gq57022x
FLT
red
ASI
green
AUX
green
Designation
I1 Status
DI1
I2 Status
DI2
I3 Status
DI3
I4 Status
DI4
Status
DO1
Status
DO2
Status
DO3
Error
AS-Interface
supply
Actuator
supply
AS-Interface Components
AS-Interface Module IP20
Status Function
off Input 1, Signal voltage (0)
on Input 1, Signal voltage (1)
off Input 2, Signal voltage (0)
on Input 2, Signal voltage (1)
off Input 3, Signal voltage (0)
on Input 3, Signal voltage (1)
off Input 4, Signal voltage (0)
on Input 4, Signal voltage (1)
off Output 1, reset
on Output 1, set
off Output 2, reset
on Output 2, set
off Output 3, reset
on Output 3, set
off OK
on Configuration error
Short circuit / sensor
supply overload or actuator
blinking supply is missing or output
driver error message
(Open-Load-Detection)
off AS-Interface supply error
on AS-Interface supply OK
off Actuator supply error
on Actuator supply OK
• 11