Table: 12 Process Image Configuration For Pt 100, Pt 200, Pt 500 And Pt 1000 - WAGO -I/O-SYSTEM 750 750-481/003-000 Manual

WAGO-I/O-SYSTEM 750
750-481/003-000 2AI RTD Ex i
Table: 12 Process Image Configuration for Pt 100, Pt 200, Pt 500 and Pt 1000, with broken wire
diagn.
Temperature
°C
<-200.0
-200.0
-100.0
0.0
100.0
200.0
500.0
750.0
800.0
850.0
>850.0
Broken wire
against RL
1) Temperature values below 0 °C are represented in two's complement binary form.
The measured value can exceed the range from –2000 to 8500 until the limitation
applies.
Manual
1.1.0
Numercial value
binary
'1000.0000.0000.0001'
'1111.1000.0011.0000'
'1111.1100.0001.1000'
'0000.0000.0000.0000'
'0000.0011.1110.1000'
'0000.0111.1101.0000'
'0001.0011.1000.1000'
'0001.1101.0100.1100'
'0001.1111.0100.0000'
'0010.0001.0011.0100'
'0010.0001.0011.0100'
'0010.0001.0011.0100'
Process Image
1)
hex. dec.
0x8001 -32767
0xF830 -2000
0xFC18 -1000
0x0000 0
0x03E8 1000
0x07D0 2000
0x1388 5000
0x1D4C 7500
0x1F40 8000
0x2134 8500
0x2134 8500
0x2134 8500
33
Status- LED
byte Error
hex. AI 1, 2
0x41 on
0x00 off
0x00 off
0x00 off
0x00 off
0x00 off
0x00 off
0x00 off
0x00 off
0x00 off
0x42 on
0x42 on