Starting The To-Pass Telecontrol Module - WAGO -TO-PASS 761 Manual

46 Commissioning
6.2 Starting the TO-PASS
Do not switch on yet!
Do not switch on the TO-PASS
so; do not insert the SIM card for this procedure.
Deactivate the PIN!
During commissioning, the SIM card may be disabled when an incorrect or
incomplete PIN is entered. It is therefore recommended that you disable the PIN
of the SIM card to be inserted. To do this, insert the SIM card in a mobile
telephone and select the menu option Security > Disable PIN.
Deactivate the call diversion
Deactivate all call diversions of the SIM card to be inserted to achieve a trouble-
free availability of the TO-PASS
Before using the TO-PASS
the telephone number.
1. Every TO-PASS
operation. You can obtain an SIM card from any mobile telephone service
provider. Special data cards are recommended.
2. Every SIM card contains a telephone number and a PIN code for enabling
the SIM card to be used in the TO-PASS
Always have this telephone number and PIN code on hand.
3. Connect the PC to the installed TO-PASS
interface.
4.. If the PC has only USB interfaces, a USB – RS-232 adapter is required.
Install the driver supplied with the adapter according to the adapter
manufacturer's specifications.
A USB adapter is available as an accessory 761-9005.
5. Start up the PC and then the TO-PASS
6. Select the menu item File > Settings.
7.Set this as a "RS-232" connection and select the appropriate interface, e.g.
"COM1".
8. Then select menu item File > New module.
761-316 TO-PASS® Mobile, 4 AI, Web, MODBUS
®
Telecontrol Module
®
telecontrol module until you are prompted to do
®
telecontrol module.
®
telecontrol module it must first be configured with
®
telecontrol module requires an SIM card for proper
WAGO-TO-PASS® 761
®
telecontrol module.
®
telecontrol module via the serial
®
operating software.
Manual
Version 2.0.0