Testmode (Service Mode For Test Print, Operation Check, Etc.); Print (Print Test Mode) - Canon MF735C Series Service Manual

TESTMODE (Service mode for test print, operation check, etc.)

PRINT (Print test mode)

TESTMODE (Service mode for test print, operation check, etc.) > PRINT (Print test mode)
PG-TYPE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
PHASE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of PG number
To set the PG number of the test print.
At trouble analysis
Enter the setting value, and then press Apply key.
0 to 26
0 to 1: For R&D use
2: Color chart
3: For R&D use
4: Rainbow chart (vertical scanning direction, A4)
5: Rainbow chart (horizontal scanning direction, A4)
6: Color grid (A4)
7: Rainbow chart (vertical scanning direction, LTR/LGL)
8: Rainbow chart (horizontal scanning direction, LTR/LGL)
9: Color grid (LTR/LGL)
10: 16 gradations
11: 17 gradations of Y/M/C/Bk/R/G/B
12: Halftone
13: For checking ghost due to transfer failure
14: For checking the density patch
15: For checking transfer
20: For R&D use
21: For checking developing performance (white spots)
22: For checking resolution
23: For checking banding image
24: 4 colors (landscape)
25: 4 colors (portrait)
26: For calibrating color difference between the front and back sides with DADF (1-path model)
0
Setting of PG output quantity
To set the number of sheets for PG output.
At trouble analysis
Enter the setting value, and then press Apply key.
1 to 99
1 sheet
1
Set 1-sided/2-sided print for PG output
To set 1-sided/2-sided print for PG output.
Even if 1 is set for a machine supporting 1-sided print, the setting is disabled.
At trouble analysis
Enter the setting value, and then press Apply key.
0 to 1
0: 1-sided
1: 2-sided
0
328
9. Service Mode