Test (Print Test Mode) - Canon imageRUNNER ADVANCE 715iF III Series Service Manual

TEST (Print test mode)

■ PG
COPIER (Service mode for printer) > TEST (Print test mode) > PG
TYPE 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
TXPH 1
DENS-K 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PG-PICK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
2-SIDE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Test print
To execute the test print.
At trouble analysis
1) Enter the setting value, and then press OK key.
2) Press Start key.
Test print is executed.
Be sure to return the value to 0 after the test print output.
0 to 50
0: Normal print
1: Grid
2: 17 gradations Tbic rank 2
3: 17 gradations 600 dpi (134-line screen or 141-line screen)
4: Solid white
5: Halftone (density: 80H, Tbic rank 2, without image correction)
6: Halftone (density: 80H, 134-line screen or 141-line screen, without image correction)
7: Solid black
8: Horizontal line (4 dots, 27 spaces)
9: Horizontal line (6 dots, 50 spaces)
10: Horizontal line (2 dots, 3 spaces)
11: Halftone (density: 60H, Tbic rank 2, without image correction)
12: Halftone (density: 80H, 134-line screen or 141-line screen, without image correction)
13: Halftone (density: 30H, Tbic rank 2, without image correction)
14: Halftone (density: 30H, 134-line screen or 141-line screen, without image correction)
15 to 50: For development
0
[Not used]
Adj of Bk-color density at test print
To adjust Bk color density when performing test print (TYPE=5).
As the greater value is set, the image gets darker.
At test print (TYPE=5)
Enter the setting value, and then press OK key.
0 to 255
128
Setting of test print Pickup Cassette
To set the Pickup Cassette for test print output.
- At problem analysis
- At test print output
Enter the setting value, and then press OK key.
1 to 8
1: Cassette 1, 2: Cassette 2, 3: Cassette 3, 4: Cassette 4, 5: Multi-purpose Tray, 6 to 8: Not used
0
Setting of PG 2-sided mode
To set 1-sided/2-sided print for PG output.
At trouble analysis
Enter the setting value, and then press OK key.
0 to 1
0: 1-sided, 1: 2-sided
0
581
8. Service Mode