Appendix 3.2 Vision System Parameter Setting - Mitsubishi Electric Melsec Q Series Programming Manual

APPENDICES

APPENDIX 3.2 Vision system parameter setting

The vision system parameters (Ethernet communication line setting, vision program
operation setting) of the MT Developer2 are set by opening an arbitrary SFC program
and using the project window [System Setting] - [Vision System Parameter] - [Ethernet
Communication Line Setting] or [Vision Program Operation Setting].
POINT
When writing the vision system parameters into the Motion CPU, execute one of
the following.
• Select the menu bar [Check/Convert] - [Vision System Parameter Check].
• Click [Convert] button of Ethernet communication line setting screen or vision
program operation setting screen.
APP - 47