Mitsubishi Electric Melsec Q Series Programming Manual page 534

APPENDICES
Motion CPU with PERIPHERAL I/F
SSCNET (/H)
(1) System configuration
This section explains the system configuration and precautions for using the
Cognex vision system connection function.
Ethernet HUB
Ethernet cable
Servo amplifier
POINT
Depending on the vision system used, power supply by Power over Ethernet (PoE)
may be required.
The Motion CPU's PERIPHERAL I/F does not support PoE, so a PoE power
source equipment (PSE) is required.
Dedicated cable
APP - 43
In-Sight Explorer R
MT Developer2
In-Sight series R
Up to 8 modules
Alignment stage,
etc.