Mitsubishi Electric Melsec Q Series Programming Manual page 344

5 OPERATION CONTROL PROGRAMS
[Functions]
Power
supply
module
Setting data
Dn
(D)
(S1)
(S2)
(S3)
(n)
(D1) —
(1) (n) words of data are read from the address specified with (S3) of the buffer
memory in the intelligent function module specified with (S2).
The intelligent function module is mounted to the target SSCNET /H head
module specified with (S1).
The data is written to device specified with (D) and after.
Device memory
(D)
H0000
H0005
H000A
H0000
(2) First I/O No. of the module mounted to the SSCNET /H head module set by
system setting is specified by (S2).
Q03UD Q173DS
CPU CPU
No.: 00H
MR-J4(W)- B
(S2) sets 04H by the system setting when a RFROM instruction is executed in
the A/D conversion module (L60AD4).
(3) The word devices that may be set at (D), (S1), (S2), (S3), (n), and (D1) are shown
below.
(Note-1)
Word devices
Wn SDn U \Gn
—
—
—
—
—
— — —
SSCNET /H head module
(S1)
(S2)
Read the data
(S3)
of a part for
(n)words
QX40 Q64AD Q64DAN
First First First
I/O No. I/O No. I/O No.
No.: 10H No.: 20H
Power
supply
MR-J4(W)- B
module
#n
Mn U \Gn.m
—
— —
— —
— —
— —
—
(Note-1): The device No. cannot be specified indirectly.
(Note-2): Specify a multiple of 16 as the device number of bit data.
(Note-3): PX and PY cannot be set.
5 - 121
Intelligent
function module
buffer memory
H0000
H0005
H000A
H0000
SSCNET /H LX40C6
head
module First
I/O No.
No.: 30H
(Note-1), (Note-2)
Bit devices
Bn Fn SMn
— —
— —
— —
— —
L60AD4 L60DA4
First First
I/O No. I/O No.
No.: 40H No.: 50H
Xn Yn
—
(Note-3) (Note-3)
— — —
— — —
— — —
— — —
—
(Note-3) (Note-3)