Read Buffer Memory Data From Head Module: Rfrom - Mitsubishi Electric Melsec Q Series Programming Manual

Motion controller (sv13/sv22)

Hide thumbs Also See for Melsec Q Series:

Table of Contents

5 OPERATION CONTROL PROGRAMS

5.13.11 Read buffer memory data from head module: RFROM

[Usable data]

[Setting data]

Setting data

RFROM(D), (S1), (S2), (S3), (n), (D1)

Start device No. which stores the reading data.

Axis No. of the target SSCNET /H head module

First I/O No. of the intelligent function module which

(00 to FEH: First 2 digits when I/O No. is 3 digits)

First address of the buffer memory of the intelligent

function module which stores the data to be read.

Number of words to be read (1 to 240)

(D1+0): Self CPU device is made to turn ON by the

reading completion.

(D1+1): Self CPU device is made to turn ON by the

reading abnormal completion.

("D1+0" also turns ON at the abnormal

: Refer to Section 1.3 for the software version that supports this function.

integer type

data to be read are stored.

Complete devices

Number of basic steps

Data type of result

Show Quick Links

Table of Contents