Mitsubishi Electric Melsec Q Series Programming Manual page 399

5 OPERATION CONTROL PROGRAMS
[Easy stroke ratio cam]
(Cam reference
position)
-2147483648
(1) Cam data can be automatically generated without using the cam data setting of
MT Developer2 by setting the stroke amount and sections.
With the current value per cycle "0" as starting point, automatically generates cam
data from the stroke and cam curve type of each section until the specified end
point (cam axis current value per cycle).
Stroke: Y[Optional unit]
(X ,Y
1
2147483647
0
Section 1
Section 2
Cam axis length per cycle
) (X ,Y )
1 2 2
(X ,Y )
3 3
(X ,Y )
4 4
Section 3
Section 4
5 - 176
(X ,Y
number of section number of section
(X ,Y )
5 5
Section 5
)
End point: X