Parameter Setting; Performance Value; Error Code - Mitsubishi Electric MELSEC iQ-F Series Manual

Restrictions or precautions
• This FB does not include the error recovery processing. Program the error recovery processing separately in accordance
with the required system operation.
• This FB cannot be used in an interrupt program.
• As this FB is executed, the A/D conversion processing stops, and thereafter when o_bOK (normal completion) turns on, the
conversion processing resumes.
• When operating the analog input module and multiple input module, the input range needs to be set according to the device
and system to be connected. Set the GX Works3 module parameters according to the application. For the analog input
module setting procedure, refer to MELSEC iQ-F FX5 User's Manual (Analog Control - Intelligent function module). For
the multi-input module setting procedure, refer to MELSEC iQ-F FX5 User's Manual (Analog Control - Intelligent
function module).

Parameter setting

No parameters are required to use this FB.

Performance value

CPU
FX5UJ
*1*2
FX5U, FX5UC
*1 When the program capacity is set to 128 K steps, the processing speed may be reduced.
*2 The labels in the standard area are used.

Error code

Error code Description
(hexadecimal)
None None
Performance value
Processing time Maximum scan time
11.4 ms 0.752 ms
11.3 ms 0.526 ms
Action
None
2 ANALOG INPUT MODULE, MULTIPLE INPUT MODULE FB
2.1 M+Model_RequestSetting (Validation of settings)
2
Number of scans
34 scan
40 scan
13