2. SETTINGS FOR THE KV-8000
Set the parameters of the KV-8000 using KV STUDIO (programming support software) manufactured by
KEYENCE CORPORATION.
2.1 Parameter Setting
❖
Point
Check that the RUN-PRG Selector Switch of the PLC is in the RUN state.
No ladder program for communications is required.
1.
From the KV STUDIO menu, select [File] → [New
project]. Set the applicable model, any project
name, and project save location, and click the
[OK] button.
2.
From the KV STUDIO menu, select [Tool] →
[Unit Editor].
3.
Drag and drop the power unit to the unit editor
window in accordance with the system
configuration, and double-click the KV-8000.
6