Quantum Data Gen 2 980 User Manual page 3

980 HDMI Protocol Analyzer User Guide
5 Real Time Mode
5.1 Accessing the Real Time mode
5.2 Real Time Mode Overview
5.3 Real Time Mode Data Panels
6 Auxiliary Channel Analyzer (ACA)
6.1 Accessing the ACA Panel
6.2 ACA Panel Description
6.3 Monitoring the HDMI auxiliary channels with the ACA
6.4 Viewing HDMI auxiliary channel traces on a PC with the ACA
7 Testing HDMI Sources, Cables and Distribution Networks for Pixel Errors
7.1 Accessing the Real Time mode
7.2 Testing HDMI Distribution Network Components with the Pixel Error Test
7.3 Running the Pixel Error Test through the command line
7.4 Testing HDMI Cables and Distribution Networks with the PRN Test
7.5 Running the Pseudo-Random Noise Test through the command line
8 Analyzing HDMI Data with your 980 Protocol Analyzer Gen 2
8.1 Overview
8.2 Operational workflow for capturing data with your 980 HDMI Protocol Analyzer
8.3 Setting the 980 HDMI Protocol Analyzer mode to HDMI
8.4 Setting the Configuration of the Link Mode
8.5 Setting the RX HDCP mode
8.6 Setting the +5V levels
8.7 Configuring the 980 HDMI Protocol Analyzer with an EDID
8.8 Viewing Incoming Video (Built-Embedded GUI only)
8.9 Using automatic triggering
8.10 Using External Triggering
8.11 Using Manual Triggering
8.12 Using Precision Trigging and Pre-Capture Filtering
8.13 Examining Captured Data
9 Passively Monitoring between a Source and Sink Device
9.2 Running HDMI tests using the Pass-Through Mode
9.3 Running HDMI tests using the Encrypted Link Analyzer
10 Running Standard Tests
Page 3
Rev. A1
96
96
98
103
126
126
128
130
138
143
143
145
154
157
163
166
166
166
166
168
170
172
174
175
179
184
184
186
189
202
202
210
222
December 19, 2012