Quantum Data Gen 2 980 User Manual page 162

980 HDMI Protocol Analyzer User Guide
The Frames Analyzed and the Total Errors fields will indicate the progress and status of the test.
7. If you are running in continuous mode, halt the test using the Stop Analysis button. If you are running the test
non-continuously, then the test will stop automatically when the number of frames specified in the Number of
Frames field is reached.
The Frames Analyzed and the Total Errors fields will indicate the progress and status of the test.
6. Touch select the Report button to obtain a report of the results.
Page 162
Rev. A1
December 19, 2012