Quantum Data Gen 2 980 User Manual page 156

980 HDMI Protocol Analyzer User Guide Rev. A1
pdax_capf: capture buffer size 179MB bs=128
INFO: Capture Trigger condition is satisfied
END: pcap_capture_start Capture complete
END: pcap_info info request type=118 complete
3. Save the captured frame to a file:
#p-scope>pdax:gfca myrefrm2
pdax:gfca myrefrm2
4. Load the captured frame:
#p-scope>pdax:gfcl myrefrm2
pdax:gfcl myrefrm2
pdax_gfcl: Loading Reference frame: [myrefrm2]
5. Run the pixel error test (will run for 255 frames)
#p-scope>pdax:pdau
pdax:pdau
6. Get statistics for the test:
#p-scope>pdax:stat
pdax:stat
pdax: stopped
frames: 255 threshold 255
errors: 0. threshold 255
To Run the Pixel Error test continuously from the command line:
1. Set the pixel error test to run continuously:
#p-scope>pdax:nfrs 0
pdax:nfrs 0
2. Initiate the test :
#p-scope>pdax:pdau
pdax:pdau
3. Query statistics for the test:
#p-scope>pdax:stat
pdax:stat
pdax: in progress
frames: 1071 threshold 0
errors: 47004766. threshold 255
Page 156 December 19, 2012