Installing A Hard Disk Backplane - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Step 4 Remove the hard disk backplane in the arrow direction. See step (2) in
5-105.
Step 5 Place the removed hard disk backplane in an ESD bag.
----End

5.7.10 Installing a Hard Disk Backplane

This topic describes how to install the front hard disk backplane.
Scenarios
Install the front hard disk backplane if the original one has failed.
Prerequisites
Conditions
●
●
Data
●
●
●
Tools
●
●
●
Hardware
Spare hard disk backplane
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare front hard disk backplane out of its ESD bag.
Step 3 Install the hard disk backplane on to the front I/O module in the arrow direction.
See step (1) in
Step 4 Tighten the screws on the hard disk backplane. See step (2) in
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the front I/O module from the RH8100 V3. For details, see
5.7.1 Removing the Front I/O
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing the front
hard disk backplane.
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
Figure 5-106.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
Figure
6.2 Powering Off the
1 Safety Instructions.
Figure 5-106.
224