Huawei RH8100 V3 User Manual page 233

RH8100 V3 Server
User Guide
Scenarios
Remove a hard disk backplane if it has failed.
Prerequisites
Conditions
●
●
Data
●
●
●
Tools
●
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Remove all cables from the hard disk backplane.
Step 3 Loosen the screws on the hard disk backplane. See step (1) in
Figure 5-105 Removing a hard disk backplane
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the front I/O module from the RH8100 V3. For details, see
5.7.1 Removing the Front I/O
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing the rear
hard disk backplane.
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Module.
6.2 Powering Off the
1 Safety Instructions.
Figure 5-105.
223