Removing A Hot-Swappable Pcie Card - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 5-150 Installing a rear I/O module
----End

5.11.3 Removing a Hot-Swappable PCIe Card

This topic describes how to remove a hot-swappable Peripheral Component
Interconnect Express (PCIe) card.
Scenarios
Remove a hot-swappable PCIe card if it has failed.
Prerequisites
Conditions
The following OSs support the hot swap feature of a PCIe card by default:
●
●
●
RHEL 6.9 supports hot swap of HBAs (BOM: 06030217) and 82599 NICs (BOM:
02311DVM).
By default, SUSE Linux Enterprise Server 11 SP3 does not support the hot swap
feature of a PCIe card. To enable SUSE Linux Enterprise Server 11 SP3 to support
this feature, run the modprobe pciehp command to load the hot swap driver. To
view the hot swap driver, run the modinfo pciehp command.
Other OSs do not support the hot swap feature of a PCIe card.
Issue 30 (2019-12-19)
Windows Server 2008 R2
Windows Server 2012
Red Hat Enterprise Linux 6.4
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
282