Huawei RH8100 V3 User Manual page 111

RH8100 V3 Server
User Guide
6.
7.
8.
9.
Issue 30 (2019-12-19)
Figure 3-16 Removing a protection cover from a PSU
Connect the OT terminal of the negative power cable to the NEG(-) wiring
terminal of the DC PSU, and connect the OT terminal of the positive power
cable to the RTN(+) wiring terminal of the PSU. Then tighten the screws. See
step (1) in Figure 3-17.
Figure 3-17 Connecting DC power cables
Install and screw the cover for the PSU. See step (2) in
Connect the other end of each DC power cable to the DC power distribution
cabinet (PDC) based on the chassis power cable connection rules.
Bind the DC power cables to the cable trough on the cabinet using cable ties.
Copyright © Huawei Technologies Co., Ltd.
3 Installing the RH8100 V3
Figure 3-17.
101