Removing A Dimm - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 5-13 Installing a heat sink
Step 12 Close the levers near the heat sink. See step (2) in
----End

5.2.7 Removing a DIMM

This topic describes how to remove a DIMM.
Scenarios
Remove a DIMM if:
●
●
Prerequisites
Conditions
You have removed the memory board from the RH8100 V3. For details, see
Removing a Memory
Data
●
●
●
Tools
Issue 30 (2019-12-19)
The DIMM has failed.
The DIMM needs to be replaced with a new model.
Board.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing a DIMM.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure 5-13.
5.2.3
125