Huawei RH8100 V3 User Manual page 241

RH8100 V3 Server
User Guide
Scenarios
Remove an NVMe PCIe SSD if:
●
●
●
Prerequisites
Conditions
You have backed up data on the NVMe PCIe SSD to be removed.
Data
●
●
●
●
●
Tools
●
●
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Remove the NVMe PCIe SSD.
Remove the NVMe PCIe SSD on Windows.
Issue 30 (2019-12-19)
The NVMe PCIe SSD has failed.
The NVMe PCIe SSD needs to be replaced with a new model.
The NVMe PCIe SSD has no free space.
● If the NVMe PCIe SSD to be removed is used as a data disk, simply remove it without
powering off the server.
● If the NVMe PCIe SSD to be removed is used as a boot disk, power off the server first.
For details, see 6.2 Powering Off the RH8100
details, see 5.8.3 Removing a SATA/SAS/SSD Hard
● Wait until the hot removal of an NVMe PCIe SSD is complete before you remove
another one.
● The interval between the removal operations of two NVMe PCIe SSDs must be longer
than 30 seconds.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing an NVMe
PCIe SSD.
You have obtained a list of all operating systems (OSs) supported by NVMe
PCIe SSDs. For details, see
If NVMe PCIe SSDs are installed in slots HDD 0 to HDD 7 in the front panel,
HDD 0 to HDD 7 correspond to slot 30 to slot 37 in the OS. For example, if
NVMe PCIe SSDs are installed in only HDD 3 and HDD 4, slot 33 in the OS
corresponds to HDD 3 and slot 34 corresponds to HDD4.
ESD gloves or ESD wrist strap
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
V3. Then manually remove the SSD. For
2.9 Software and Hardware
Disk.
Compatibility.
1 Safety Instructions.
231