Removing A Nic - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Step 3 Insert the TPM into the connector on the HFC. See step (1) in
Figure 5-142 Installing a TPM
Step 4 Tighten the screw on the TPM using a Phillips screwdriver. See step (2) in
5-142.
----End

5.10.5 Removing a NIC

This topic describes how to remove a network interface card (NIC).
Scenarios
Remove a NIC if:
●
●
Prerequisites
Conditions
You have powered off the RH8100 V3. For details, see
RH8100
Data
Issue 30 (2019-12-19)
The NIC has failed.
The NIC needs to be replaced with a new model.
V3. Then you have removed all power cables from the server.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
6.2 Powering Off the
Figure 5-142.
Figure
269