Huawei RH8100 V3 User Manual page 325

RH8100 V3 Server
User Guide
Documents
You can change an iBMC user password on the iBMC WebUI or CLI. The following
describes how to change a user password on the iBMC WebUI. For details about
how to change a user password on the iBMC CLI, see the
iBMC User Guide
Procedure
Step 1 On the menu bar of the iBMC WebUI, choose Config. In the navigation tree,
choose User Settings.
The User Settings page is displayed, as shown in
Figure 7-7 User Settings
Step 2 Click
The area for modifying user information is displayed below, as shown in
7-8.
Issue 30 (2019-12-19)
.
If Password Complexity Check is set to Enable, the system performs the password
complexity check when you change a user password.
for the user whose password needs to be changed.
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the RH8100 V3
Huawei Rack Server
Figure 7-7.
Figure
315