Installing An Hfc - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Step 2 Ensure that the system where the HFC is located is powered off (the power
indicator of the system is steady yellow or off). Press the ejector release buttons to
eject the ejector levers. See step (1) in
Step 3 Raise both ejector levers on the HFC. See step (2) in
Step 4 Pull the HFC out of the slot while holding the ejector levers. See step (3) in
5-139.
Figure 5-139 Removing an HFC
Step 5 Remove the TPM or TCM and USB flash drive from the connectors on the HFC,
and place the HFC in an ESD bag.
----End

5.10.2 Installing an HFC

This topic describes how to install a High-performance Fusion Console (HFC)
when you replace the original one or replace the USB flash drive, trusted platform
module (TPM), or trusted cryptography module (TCM) on the HFC.
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure 5-139.
Figure 5-139.
Figure
264