Huawei RH8100 V3 User Manual page 162

RH8100 V3 Server
User Guide
●
●
Hardware
Spare front I/O module
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare front I/O module out of the ESD bag, and install all internal
components, such as riser cards, PCIe cards, RAID controller cards, iBBUs, and
supercapacitors on the front I/O module.
Step 3 Gently insert the front I/O module into the slot while holding the ejector levers on
the front I/O module. See step (1) in
Step 4 Lower the ejector levers on the front I/O module. See step (2) in
Issue 30 (2019-12-19)
ESD gloves
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure 5-36.
1 Safety Instructions.
Figure 5-36.
152