Indicators And Buttons - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Table 2-11 Ports on HFC-2 of the rear panel
Name
VGA port
USB port
iBMC
manageme
nt network
port
Serial port
Network
port

2.4 Indicators and Buttons

This topic describes the RH8100 V3 indicators and buttons.
You can observe the indicators to determine RH8100 V3 status.
Table 2-12
Issue 30 (2019-12-19)
Typ Quanti
e ty
DB1 1
5
USB 2
2.0
RJ45 1
RJ45 1
- -
In single-system mode, only the LOMs in the HFC-2 slot provide the NC-SI function.
describes the indicators and buttons on the RH8100 V3 front panel.
Copyright © Huawei Technologies Co., Ltd.
Single- Dual-System
System Mode
Mode
Available Available
Available Available
Available Available
Available Available
Available Available
2 About the RH8100 V3
Description
The VGA port is
connected to a
display terminal,
such as a monitor.
The USB port is
connected to a
USB device.
The GE port is
used to manage
the server.
Three-pin serial
port. The default
baud rate is
115200 bits/s.
This serial port is
used as the
system serial port
by default. You
can set it as the
iBMC serial port
on the iBMC CLI.
The type and
quantity of
network ports
vary according to
the configured
LOM type.
24