Table of Contents
Advertisement
RH8100 V3 Server
User Guide
● When equipped with E7 v2 or E7 v3 processors, the RH8100 V3 supports the
● Memory board hot swap can be performed only once within a power cycle of
● If you need to replace the memory board or DIMMs online, contact Huawei
● When equipped with E7 v4 processors, the RH8100 V3 does not support the
1.
2.
Issue 30 (2019-12-19)
NO TICE
DIMM hot swap function. The prerequisite is that live memory migration is
enabled.See
Step 1
to
the RH8100 V3. To remove a memory board after memory board hot swap has
been performed within a power cycle, power off the server and perform
For details about how to power off a server, see
V3.
technical support to confirm the replacement solution based on the critical
operation process to avoid service interruption.
DIMM hot swap function.
Select one of the following migration methods:
NO TICE
Migrate data to a spare memory board only when the CPU usage and
memory usage are both less than 50%. Otherwise, services may be affected.
–
To migrate data to a spare memory board using the iBMC WebUI, go to
Step
2.2.
–
To migrate data to a spare memory board by pressing the button on the
faulty memory board, go to
(Optional) Choose Diagnosis > Memory Hot-swap, click a memory board
with the green or orange indicator, and click Move Data. See
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Step 4
in
7.6 Configuring the
Step
2.3.
BIOS.
6.2 Powering Off the RH8100
Figure
Step
3.
5-3.
113
Advertisement
Table of Contents
