Huawei RH8100 V3 User Manual page 142

RH8100 V3 Server
User Guide
Scenarios
Install a DVD drive+LCD module if:
●
●
●
Prerequisites
Conditions
No special conditions are required for this operation.
Data
●
●
●
Tools
●
●
Hardware
Spare DVD drive+LCD module
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare DVD drive+LCD module out of the ESD bag, and install an LCD and
DVD drive on the DVD drive+LCD module.
For details, see
Step 3 Insert the DVD drive+LCD module into the chassis as far as it will go. See step (1)
in
Step 4 Press the button on the DVD drive+LCD module. See step (2) in
Issue 30 (2019-12-19)
A DVD drive+LCD module has failed.
An LCD has failed.
A DVD drive has failed.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a DVD
drive+LCD module.
ESD gloves
Packaging materials, for example, an ESD bag
5.3.4 Installing an LCD
Figure 5-20.
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
and 5.3.6 Installing a DVD
1 Safety Instructions.
Drive.
Figure 5-20.
132