Installing A Hard Disk Backplane - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Step 12 Remove one side of the hard disk enclosure. See step (2) in
Step 13 Remove the hard disk backplane. See step (3) in
Step 14 Place the removed hard disk backplane in an ESD bag.
----End

5.6.12 Installing a Hard Disk Backplane

This topic describes how to install a hard disk backplane.
Scenarios
Install a hard disk backplane when it is faulty and needs to be replaced.
Prerequisites
Conditions
●
●
Data
●
●
●
Tools
●
●
●
Hardware
Spare hard disk backplane
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare hard disk backplane out of its ESD bag.
Step 3 Install the hard disk backplane on the hard disk enclosure. See step (1) in
5-90.
Step 4 Install one side of the hard disk enclosure. See step (2) in
Issue 30 (2019-12-19)
You have powered off the RH8100 V3. For details, see
RH8100 V3. Then you have removed all power cables from the server.
You have removed the hard disk indicator panel. For details, see
Removing a Hard Disk Indicator
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing the hard
disk backplane.
ESD gloves
Packaging materials, for example, an ESD bag
Phillips screwdriver
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
Figure
Panel.
Figure 5-89.
5-89.
6.2 Powering Off the
5.6.9
1 Safety Instructions.
Figure
Figure 5-90.
205