Huawei RH8100 V3 User Manual page 195

RH8100 V3 Server
User Guide
Scenarios
Install a hard disk if:
●
●
●
●
Prerequisites
Conditions
No special conditions are required for this operation.
Data
●
●
●
Tools
●
●
Hardware
A hard disk to be installed in the RH8100 V3
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Take the spare hard disk out of its ESD bag.
Step 3 Fully open the ejector lever and push the hard disk into the hard disk enclosure
along the guide rails until the hard disk is in place. See step (1) in
Figure 5-67 Installing a hard disk
Issue 30 (2019-12-19)
A hard disk has failed.
A hard disk needs to be replaced with a new model.
A hard disk that has no free space needs to be replaced.
A hard disk needs to be added.
The server does not need to be powered off when the hard disk is installed.
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for installing a hard disk.
ESD gloves
Packaging materials, for example, an ESD bag
Copyright © Huawei Technologies Co., Ltd.
5 Removing and Installing Parts of the RH8100 V3
1 Safety Instructions.
Figure 5-67.
185