Connecting Cables To A Mouse, Keyboard, And Vga Port - Huawei RH8100 V3 User Manual

RH8100 V3 Server
User Guide
Figure 3-10 Connecting a ground cable
Step 3 Use a Phillips screwdriver to loosen the screw on the ground point in the cabinet.
(You are advised to choose the screw nearest to the server.) Connect the other end
of the ground cable to the removed screw. Install the screw in the ground point,
and tighten the screw.
----End

3.4.2 Connecting Cables to a Mouse, Keyboard, and VGA Port

Scenarios
After powering on the server, set the basic input/output system (BIOS) and RAID,
and log in to the operating system (OS).
The front and rear panels of the server provide DB15 video graphics array (VGA)
ports but have no standard PS2 port for a keyboard or mouse. You can connect
the keyboard and mouse to the USB ports on the front or rear panel based on
actual installation conditions. The following describes two connection methods:
●
●
Issue 30 (2019-12-19)
All the ground cables in the cabinet are connected to the busbars on two sides of the
cabinet. The external ground cables are connected to the M8 ground screws at the top and
bottom of the cabinet. The ground cable of the chassis can be connected to a near busbar
of the cabinet with the M6 screw.
Connect the keyboard and mouse to the USB ports.
Connect the keyboard and mouse by using a USB-PS2 cable.
Copyright © Huawei Technologies Co., Ltd.
3 Installing the RH8100 V3
91